Loading ...
Loading ...
Loading ...
525B
Users Manual
3-10
Measuring Pressure
Many ranges and types of pressure modules are available from Fluke. See
“Accessories” in Chapter 6 of this manual for a complete list of supported pressure
modules. Before you use a pressure module, read its instruction sheet. Pressure
modules vary in use, media, and accuracy.
To measure pressure, attach the appropriate pressure module for the process
pressure to be tested as shown in Figure 3-5.
To measure pressure:
1. Connect a pressure module to the Calibrator as shown in Figure 3-5.
2. Press . The Calibrator automatically senses which pressure module is
attached and sets its range accordingly.
3. If appropriate, zero the pressure module as described in the module’s
instruction sheet. Modules vary in zeroing procedures depending on the
module type, but all require you to press .
4. Pressurize the module with a pressure source to the desired level.
You can press to change pressure display units to psi, inH20 4ºC,
inH20 20ºC, cmH20 4ºC, cmH20 20º C, bar, mbar, kPa, inHg 0ºC, mmHg 0ºC,
kg/cm2.
RANGE
-15/+100 PSIG
BURST PRESSURE 300 PSIG
MAX TORQUE, SEE MANUAL
L H
PRESSURE MODULE
700
P
D6
-1/+7 bar
INPUT
OUTPUT
HI
VOLTS
mA
RTD
HI
LO
HI
LO
LO
TC
SENSE
INPUT/OUTPUT
4W RTD
20V PK
MAX
100V MAX
100mA MAX
20V PK
MAX
20V PK
MAX
fcn21f.eps
Figure 3-5. Connection for Measuring Pressure
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...