Loading ...
Loading ...
Loading ...
Getting Started
Safety Information
1
1-3
A Warning statement identifies hazardous conditions and actions that could cause
bodily harm or death.
A Caution statement identifies conditions and actions that could damage the
Calibrator or the equipment under test.
International symbols used on the Calibrator and in this manual are explained in
Table 1-2.
Warning
To avoid possible electric shock or personal injury, follow these guidelines:
• Use the Calibrator only as specified in this manual, or the protection provided by
the Calibrator might be impaired.
• Inspect the Calibrator before using it. Do not use the Calibrator if it appears
damaged. Look for cracks or missing plastic. Pay particular attention to the
insulation around the connectors.
• Have the Calibrator serviced only by qualified service personnel.
• Do not apply more than the rated voltage between the terminals, as marked on
the Calibrator, or between any terminal and earth ground.
• Always use the power cord and connector appropriate for the voltage and outlet
of the country or location in which you are working.
• Never operate the Calibrator with the cover removed or the case open.
• Never remove the cover or open the case of the Calibrator without first removing
the power source.
• Use caution when working with voltages above 30 V ac rms, 42 V ac peak, or 60
V dc. These voltages pose a shock hazard.
• Use only the replacement fuse(s) specified in this manual.
• Use the proper terminals, function, and range for your measurements.
• Do not operate the Calibrator around explosive gas, vapor, or dust.
• When servicing the Calibrator, use only specified replacement parts.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...