Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
8 6 i n t . s i g l e n t . c o m
Trigger Setup
Touch the trigger descriptor box to display the quick menu of trigger settings. The trigger setup dialog
box is displayed on the right side of the screen.
Quick menu
A. Touch the level region and rotate the Level knob on
the front panel to adjust the trigger level; touch the
region again and the virtual keypad will be available
B. ▲ to increase and ▼ to decrease the trigger level
C. Set trigger level to the vertical center of the waveform
automatically
D. Set the trigger mode to "Auto", which is equivalent to
pressing the Auto button on the front panel
E. Set the trigger mode to "Single", which is equivalent
to pressing the Single button on the front panel
F. Set the trigger mode to "Normal", which is equivalent
to pressing the Normal button on the front panel
Trigger setup dialog box:
A. Select trigger type
B. Select the trigger source
C. Select the trigger slope (When the trigger type is "Edge",
"Slope" and other specific types)
D. Set holdoff (None/Time/Events)
E. Set trigger coupling mode (DC/AC/LF Reject/HF Reject)
F. Enable/disable Noise Rejection. When Noise Reject is
on, the trigger hysteresis is increased, so the noise
immunity of the trigger circuit is better. As a compromise,
the trigger sensitivity degrades
G. Set the Zone trigger
Loading ...
Loading ...
Loading ...