Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
i n t . s i g l e n t . c o m 3 5
Connecting to External Devices/Systems
6.3.1 Power Supply
The standard power supply for the instrument is 100~240 V, 50/60 Hz. Please use the power cord
provided with the instrument to connect it to AC power.
6.3.2 LAN
Connect the LAN port to the network with a network cable with an RJ45 connector for remote control.
See chapter “Remote Control” for detailed information on controlling the instrument with a computer.
Follow the steps below to set LAN connection:
Utility
＞
Menu
＞
I/O
＞
LAN Config
See section “LAN” for details of the configuration.
6.3.3 USB Peripherals
Connect a USB storage device (FAT32 format recommended) to one of the USB host ports for data
transfer, or connect a USB mouse/keyboard to one of the USB host ports for controlling the instrument.
See chapter “Save/Recall” for details of data transfer.
6.3.4 Auxiliary Output
When Mast Test is enabled, the port outputs the pass/fail signal, otherwise, it outputs the trigger
indicator. The trigger indicator can be used to measure the waveform capture rate.
See the chapter "Mask Test" for more details on the pass/fail output.
Loading ...
Loading ...
Loading ...