Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
1 1 4 i n t . s i g l e n t . c o m
16 Serial Trigger and Decode
Overview
The SDS2000X HD supports serial bus trigger and decoding on the following serial bus protocols:
I2C, SPI, UART, CAN, LIN, FlexRay, CAN FD, I2S, MIL-STD-1553B, SENT, and Manchester.
Press the Setup button on the front panel or touch the trigger descriptor box, and then select the
Type as Serial in the trigger dialog box to set the serial trigger:
A. Select the type as Serial
B. Select the serial bus protocol
C. Set the signal, including the mapping relation
between channels and bus signals, and the
thresholds
D. Trigger setting
Touch the Analysis > Decode to turn on the serial decode dialog box:
Loading ...
Loading ...
Loading ...