Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
i n t . s i g l e n t . c o m 2 4 3
Transient Response
Transient response analysis can determine the response speed of the output voltage of the power
supply to the change of the output load. This time starts from the first time that the output voltage exits
the stable band and ends at the last time that the output voltage enters the stable band.
Signal Settings
Touch Signal to recall signal settings dialog box:
A. Set the output voltage source
B. Set the output current source
C. Set the duration. The oscilloscope will set the
appropriate time base according to the duration
D. Set the stable output voltage, i.e. the expected output
DC voltage of the power supply in a stable state
E. Set the overshoot percentage of output voltage, which
can be used to determine the stable band value of
transient response and adjust the vertical scale of the
oscilloscope
F. View the connection guide
G. Return to the previous menu
Configuration
Touch Config to recall the configuration dialog box:
A. Set the input low current value. This is the expected
low current value before or after the load change
B. Set the input high current value. This is the expected
high current value before or after the load change
C. Return to the previous menu
Loading ...
Loading ...
Loading ...