Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
i n t . s i g l e n t . c o m 2 6 9
System
Device Info – Includes Model, Serial Number, Firmware Version, and Hardware Version of the AWG
module.
Upgrade
The firmware here refers to the firmware of the SAG1021I module. The SDS2000X HD supports
firmware and configuration file upgrades for the SAG1021I via a U disk. Follow the steps below:
1. Copy the upgrade file (*.ADS) to the U disk.
2. Insert the U disk to one of the USB host ports of the oscilloscope.
3. Touch Browse to select the path of the upgrade file. See the chapter "Save/Recall" for
the detailed operation.
4. Touch Upgrade to start the upgrade progress. A progress bar shows the percentage
finished.
5. After the upgrade, the SAG1021I will be removed from the system, and the oscilloscope
prompts "Upgrade completed. Please reconnect the AWG device."
6. Enter the System dialog box again to check if the upgraded hardware version number
is consistent with the target version.
Warning: Don't cut off the power during the upgrade！
Loading ...
Loading ...
Loading ...