Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
i n t . s i g l e n t . c o m 2 5 3
A. Set the reference position to center or top
B. Set the scale of the phase coordinate axis
C. Set the reference level, the max value of the phase
coordinate axis
D. Set the phase unit (Degree or Rad)
E. Auto-Set. According to the output signal phase curve,
the oscilloscope automatically sets the scale and
reference level
F. Return to the previous menu
Cursors
SDS2000X HD can use the cursor to measure the Bode plot curve. The cursor of the Bode plot is
similar to the ordinary cursor, see the chapter "Cursors" for details. Touch Display > Cursors to
recall the cursor setting dialog box.
A. Turn on/off the cursors of the Bode plot
B. Set the cursors type (X or Y)
C. Specify the cursor and set the position (by gestures,
universal knob, or virtual keypad)
D. Set the source 1
E. Set the source 2
F. Return to the previous menu
Trace Visibility
When multiple output signals are connected, the Bode plot interface will display the amplitude and
phase curves of all output signals at the same time. Users can turn on/off other scanning curves to
observe the details of specific curves. Touch Display > Trace Visibility to recall the setting
dialog box.
Loading ...
Loading ...
Loading ...