Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
2 1 2 i n t . s i g l e n t . c o m
Perform Analysis > Mask Test to open the Mask Test dialog box:
A. Turn on/off the test
B. Select the source（C1~C4）
C. Select the rule（All In, All Out, Any In, and Any Out）
D. Set the mask
E. Turn on/off the Pass/Fail operation. Turning off the operation
when the test is in progress will stop the test immediately,
and the counters in the information display area will stop.
Turning on the operation again re-starts the test and all the
counters are cleared. Pressing the Clear Sweeps button
on the front panel is equivalent.
F. Turn on/off the information display
G. Turn on/off “Stop on Fail”. When it is "on", the oscilloscope
stops the acquisition once it detects a failure
H. Turn on/off “Failure to History”. When it is "on", the failure
frame will be stored internally and can be viewed through the
history function
I. Turn on/off “Capture on Fail”. When it is "on", the failure
waveform is detected, and the screenshot with the failure
frame will be stored in the external U disk.
J. Turn on/off the sound prompt when a failure occurs.
Loading ...
Loading ...
Loading ...