Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
i n t . s i g l e n t . c o m 1 7 7
Simple Measurements
Enabling Simple Measurement displays all selected measurement parameters of the specified
channel at the same time. The font color of the measurement parameters is consistent with the color
of the specified source. Yellow for Channel 1, Purple for Channel 2, etc.
Gate
Sometimes the user may want to measure parameters for a certain specified time range of the signal
and ignore signal parts that lie outside of that range. In this case, the Gate function can be helpful.
Turn on the Gate , then two horizontal cursors A and B will
appear in the grid area. The gate setting dialog box will be
displayed on the right.
Gate cursors A and B are used to define the range of time for
parameter measurements. The oscilloscope only measures the
parameters of the data between A and B, ignoring the data
outside the range.
The setting of gate cursors is similar to that of ordinary cursors.
See "Select and Move Cursors" for details.
The figure below shows a scenario in which the gate function is used to measure the peak-peak
parameter of the trough of an amplitude modulated waveform:
Loading ...
Loading ...
Loading ...