Loading ...
Loading ...
Loading ...
SDS2000X HD Series Digital Oscilloscope User Manual
1 6 2 i n t . s i g l e n t . c o m
Set Parameters
Touch Type in the measure dialog box, or touch + in the measurement parameters and
statistics display area to open the parameter selection window:
A. Set the source of the current setting.
B. Measurement parameter classification tabs, including Favorite, Vertical, Horizontal,
Miscellaneous, and CH Delay. Touch a tab and in the area will display the
corresponding parameters
C. Parameters. Touch the parameter to be measured to activate it, and touch it again to close
the parameter.
D. Background highlighted parameters represent it is activated. In the figure above, "Pk-Pk"
and "ROV" are activated.
E. Description of the last selected parameter.
The correct steps to add a measurement parameter are to select the source in the area and then
select the parameter in the area. For example, to add Pk-Pk measurements for C1 and Period
measurements for C2, follow the steps below:
Source > C1 > Vertical > Pk-Pk
Source > C2 > Horizontal > Period
For the channel delay (CH Delay) measurement, because the number of sources involved is greater
than 1, the steps to specify the source is different:
Loading ...
Loading ...
Loading ...