Loading ...
Loading ...
Loading ...
An SSID or network key of a wireless router was entered manually, but the entry was incorrect.
● Check the SSID and network k
ey, and enter the correct ones again.
Checking the SSID and Network Key(P. 31)
Setting Up Connection by Specifying Detailed Settings(P. 28)
A wir
eless router could not be detected due to setting problems of the network to be connected.
● Check whether the machine is properly installed and ready to connect to the network.
Installation/Settings Problems(P. 592)
● If the pr
oblem persists, check the security settings of the wireless router.
Cannot print RX data.
Received documents cannot be printed due to some specic situation.
● Check
if there has occurred one of the following situations. If messages including causes and solutions
appear on the display, check the contents.
A cover is open.
There is no paper loaded.
The paper is jammed.
The toner cartridge is consumed.
An error has occurred.
Cannot receive the fax. Make sure the fax was sent correctly by the sender.
The recipient's machine did not respond within 35 seconds.
● Ask the sender to send the fax again. If you hear a beep, select <Start Receiving> to r
eceive the fax.
Receiving Faxes(P. 224)
Cannot recognize the image.
An image which cannot be previewed was selected in Memory Media Print.
● When
the machine has insucient memory space, preview cannot be displayed. Even JPEG or TIFF images
may not be displayed.
Cannot send because more than one destination is specied.
Sending a fax to multiple destinations is disabled.
● T
o specify multiple destinations, you need to set <Restrict Sequential Broadcast> to <Off>. For more
information, contact your Administrator.
Restricting Sequential Broadcasts(P. 407)
Troubleshooting
619
Loading ...
Loading ...
Loading ...