Loading ...
Loading ...
Loading ...
<Change Default Settings (Fax)>
You can change the default settings used for sending faxes. The selected settings are used as the default
settings when scanning originals. Changing the Default Settings for Functions(P. 171)
<Resolution>
<200 x 100 dpi (Normal)>
<200 x 200 dpi (Fine)>
<200 x 200 dpi (Photo)>
<200 x 400 dpi (Superne)>
<400 x 400 dpi (Ultr
ane)>
<Density>
Nine Levels
<2-Sided Original >
<Off>
<Book Type>
<Calendar Type>
<Sharpness>
Seven Levels
<Off-Hook Alarm>
Select whether the machine makes an alert sound when the handset of a telephone connected to the machine
is not properly set on the cradle. You can also adjust the volume of the alert sound.
0 to 3
<Menu> <Function Settings> <Send> <Fax Settings> <Off-Hook Alarm> Select the
volume of the alert sound
<Apply>
<ECM TX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on received faxes, see <ECM RX>(P. 532) .
<Off>
<On>
<Menu> <Function Settings> <Send> <Fax Settings> <ECM TX> <On>
● ECM must be enabled on both the machine and the other fax device because error checks are
performed on both the sending and receiving devices.
Setting Menu List
525
Loading ...
Loading ...
Loading ...