Loading ...
Loading ...
Loading ...
<Menu> <Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <Format
Host Rsr
cs. MIB to RFC2790>
<Apply> <OK> Restart the machine
<Use Dedicated Port>
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan
Utility and when br
owsing or specifying the machine settings over the network.
<Off>
<On>
<Menu> <Preferences> <Network> <Use Dedicated Port> Select <Off> or <On>
<OK> Restart the machine
<Dedicated Port Auth. Method>
Specify whether to limit the authentication method specically to the secur
e one when using the dedicated port. If
<Mode 2> is selected, the authentication method is limited specically to the secure one.
<Mode 1>
<Mode 2>
<Menu> <Preferences> <Network> <Dedicated Port Auth. Method> Select <Mode 1> or
<Mode 2>
● If <Mode 2> is selected, you cannot establish a connection fr
om the device management software or driver
in some cases.
<Wait Time for Conn. at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network envir
onment.
Setting a
Wait Time for Connecting to a Network(P. 56)
0 to 300 (sec.)
Setting Menu List
469
Loading ...
Loading ...
Loading ...