Loading ...
Loading ...
Loading ...
5 Adjust the width guide to lightly touch the edge of the stack. Make sure the paper or specialty media fits
loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
6 From the printer control panel, set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder
Size and MP Feeder Type) based on the paper or specialty media loaded.
Linking and unlinking trays
When one linked tray becomes empty, paper feeds from the next linked tray. We recommend giving all custom
paper, such as letterhead and dierent colored plain papers, a dierent custom type name so that the trays
they are in do not automatically link.
Linking and unlinking trays
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > Paper Menu.
3 Change the paper size and type settings for the trays you are linking.
• To link trays, make sure the paper size and type for the tray match that of the other tray.
• To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.
4 Click Submit.
Note: You can also change the paper size and type settings using the printer control panel. For more
information, see
“Setting the paper size and type” on page 61.
Warning—Potential Damage: Paper loaded in the tray should match the paper type name assigned in the
printer. The temperature of the fuser varies according to the specified paper type. Printing issues may occur
if settings are not properly configured.
Loading paper and specialty media 72
Loading ...
Loading ...
Loading ...