Loading ...
Loading ...
Loading ...
• Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make
sure the paper is large enough for the data being printed.
• Cancel the print job.
34 Incorrect paper type, check [paper source]
Try one or more of the following:
• Load the appropriate paper or specialty media in the proper tray.
• Confirm that the wheel on Tray 1 is set to the paper type loaded in the tray. Make sure the paper type
matches the document you are trying to print.
• Tou ch Continue to clear the message and print using a dierent tray.
• Check the tray length and width guides and make sure the paper is loaded properly in the tray.
• Make sure the correct paper size and type are
specified
on the Print Properties or Print dialog settings.
• Check that the paper type is correctly set. For example, if the MP Feeder Type is set to Universal, then
make sure the paper is large enough for the data being printed.
• Cancel the print job.
35 Insucient memory to support Resource Save feature
Try one or more of the following:
• Tou ch Continue to disable Resource Save and continue printing.
• To enable Resource Save after receiving this message, make sure the link buers are set to Auto, and
then exit the menus to activate the link buer changes. When Ready appears, enable Resource Save.
• Install additional memory.
36 Printer service required
Tou ch Continue to clear the message or contact customer support.
37
Insucient
memory to collate job
Try one or more of the following:
• Tou ch Continue to print the portion of the job already stored and begin collating the rest of the print
job.
• Cancel the current print job.
37
Insucient
memory for Flash Memory Defragment operation
Try one or more of the following:
• Tou ch Continue to stop the defragment operation and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
Troubleshooting 292
Loading ...
Loading ...
Loading ...