Loading ...
Loading ...
Loading ...
Menu item Description
ENA Address
yyy.yyy.yyy.yyy
Sets the network address information for an external print server
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
ENA Netmask
yyy.yyy.yyy.yyy
Sets the netmask information for an external print server
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
ENA Gateway
yyy.yyy.yyy.yyy
Sets the gateway information for an external print server
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
Parallel [x] menu
Menu item Description
PCL SmartSwitch
On
O
Sets the printer to automatically switch to PCL emulation when a print job
received through a serial port requires it, regardless of the default printer
language
Notes:
• On is the factory default setting.
• When set to O, the printer does not examine incoming data. The printer
uses PostScript emulation if PS SmartSwitch is set to On. It uses the
default printer language specified in the Setup menu if PS SmartSwitch is
set to O.
PS SmartSwitch
On
O
Sets the printer to automatically switch to PS emulation when a print job
received through a serial port requires it, regardless of the default printer
language
Notes:
• On is the factory default setting.
• When set to O, the printer does not examine incoming data. The printer
uses PCL emulation if PCL SmartSwitch is set to On. It uses the default
printer language
specified
in the Setup menu if PCL SmartSwitch is set to
O.
NPA Mode
Auto
On
O
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
• Auto is the factory default setting.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is then updated.
Understanding the printer menus 157
Loading ...
Loading ...
Loading ...