Loading ...
Loading ...
Loading ...
1
2
3
1 ISP connector
2 Firmware and flash memory card connectors
3 Memory card connectors
4 Push the system board back into place.
Installing a memory card
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer
o,
and unplug the power
cord from the wall outlet before continuing. If you have any other devices attached to the printer, then
turn them o as well, and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or
connectors.
An optional memory card can be purchased separately and attached to the system board.
1 Access the system board.
For more information, see
“Accessing the system board” on page 27.
Note: This task requires a
flathead
screwdriver.
2 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
Additional printer setup 29
Loading ...
Loading ...
Loading ...