Loading ...
Loading ...
Loading ...
Menu item Description
Scanner Jam Recovery
Job level
Page level
Specifies how a scanned job should be reloaded if a paper jam
occurs in the ADF
Notes:
• Job level is the factory default setting.
• If Job level is selected, then the entire job must be
rescanned if any pages jam.
• If Page level is selected, then rescan from the jammed
page forward.
Web Page Refresh Rate
30–300
Specifies the number of seconds between Embedded Web
Server refreshes
Note: 120 seconds is the factory default setting.
Contact Name Specifies a contact name for the printer
Note: The contact name will be stored on the Embedded
Web Server.
Location Specifies the location of the printer
Note: The location will be stored on the Embedded Web
Server.
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Hole Punch Alarm
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
O
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control.
Single sounds three quick beeps.
• O is the factory default setting for Cartridge Alarm. O
means no alarm will sound.
• Continuous repeats three beeps every 10 seconds.
Timeouts
Standby Mode
Disabled
1–240
Specifies the number of minutes of inactivity before the printer
enters a lower power state
Note: 15 minutes is the factory default setting.
Timeouts
Sleep Mode
2–240
Sets the amount of time the printer waits after a job is printed
before it goes into a reduced power state
Note: 5 minutes is the factory default setting.
Understanding the printer menus 173
Loading ...
Loading ...
Loading ...