Loading ...
Loading ...
Loading ...
Menu item Description
Security Reset Jumper
Access controls=”No Security”
No
Eect
Reset factory security defaults
Changes the value of the security settings
Notes:
• Access controls=”No Security” retains all the security information that the
user has defined. “No Security" is the factory default setting.
• “No Eect” means the reset has no eect on the device’s security
configuration.
• “Reset factory security defaults” deletes all security information that the
user has defined, and assigns the factory default value to each setting in
the Miscellaneous Security Settings section of both the panel and the
Web page.
LDAP Certificate Verification
Demand
Try
Allow
Never
Allows the user to request a server certificate
Notes:
• “Demand” means a server certificate is requested. If a bad certificate is
provided or if no certificate is provided, the session is terminated
immediately. “Demand” is the factory default setting.
• “Try ” means a server certificate is requested. If no certificate is provided,
the session proceeds normally. If a bad certificate is provided, the
session is terminated immediately.
• “Allow” means a server certificate is requested. If no certificate is
provided, the session proceeds normally. If a bad certificate is provided,
it will be ignored and the session proceeds normally.
• “Never” means no server certificate is requested.
Minimum PIN Length
1–16
Limits the digit length of the PIN.
Note: 4 is the is the factory default setting.
Confidential Print menu
Menu item Description
Max Invalid PIN
O
2–10
Limits the number of times an invalid PIN can be entered
Notes:
• This menu appears only if a formatted, non-defective printer hard disk is
installed.
• Once the limit is reached, the print job for that user name and that PIN are
deleted.
Confidential Job Expiration
O
1 hour
4 hours
24 hours
1 week
Limits the amount of time a confidential print job stays in the printer before it is deleted
Notes:
• If the Job Expiration setting is changed while confidential print jobs reside on
the printer RAM or printer hard disk, then the expiration time for those print
jobs does not change to the new default value.
• If the printer is turned o, then all confidential jobs held in printer RAM are
deleted.
Note: O is the factory default setting.
Understanding the printer menus 164
Loading ...
Loading ...
Loading ...