Loading ...
Loading ...
Loading ...
2-58 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Electrical System
Lights and Switches Operation Inspection
First Step
•
Set the gear position in the neutral position.
•
Turn the ignition switch on.
•
The following lights should go on according to below table.
City Light (LED) [A] Goes on
Taillight (LED) [B] Goes on
License Plate Light [C] Goes on
Meter Panel Illumination (LED) [D] Goes on
Meter Panel LCD [E] Goes on
Green Neutral Indicator (LED) [F] Goes on
Oil Pressure Warning Indicator [G] and Red
Warning Indicator (LED) [H]
Goes on
Yellow ABS Indicator (LED) [I] (ABS
Equipped Models)
Goes on
If the light does not go on, inspect or replace the following
parts.
Battery (see Charging Condition Inspection in the Elec-
trical System chapter)
City Light (LED) (see City Light (LED) Removal/Installa-
tion in the Electrical System chapter)
License Plate Light Bulb (see License Plate Light Bulb
Replacement in the Electrical System chapter)
Meter Panel LCD (see Meter Unit Inspection in the Elec-
trical System chapter)
Green Neutral Indicator (LED) (see Meter Unit Inspec-
tion in the Electrical System chapter)
Red Warning Indicator (LED) (Oil Pressure Warning)
(see Meter Unit Inspection in the Electrical System
chapter)
Meter Panel Illumination (LED) (see Meter Unit Inspec-
tion in the Electrical System chapter)
ECU (see ECU Power Supply Inspection in the Fuel Sys-
tem (DFI) chapter)
Main Fuse 30 A, Meter Fuse 7.5 A and Brake Light/Horn
Fuse 7.5 A (see Fuse Inspection in the Electrical System
chapter)
Ignition Switch (see Switch Inspection in the Electrical
System chapter)
OilPressureSwitch(seeSwitchInspectionintheElec-
trical System chapter)
Neutral Switch (see Neutral Switch Inspection in the
Electrical System chapter)
Harness (see Wiring Inspection in the Electrical System
chapter)
Yellow ABS Indicator (LED) (ABS Equipped Models)
(see Yellow ABS Indicator (LED) Inspection in the
Brakes chapter)
Loading ...
Loading ...
Loading ...