Loading ...
Loading ...
Loading ...
ENGINE TOP END 5-17
Cylinder Head Cover
Cylinder Head Cover Removal
•
Remove:
Air Cleaner Housing (see Air Cleaner Housing Removal
in the Fuel System (DFI) chapter)
Stick Coils (see Stick Coil Removal in the Electrical Sys-
tem chapter)
Air Suction Valves (see Air Suction Valve Removal)
Bracket Bolt [A]
Bracket [B]
•
Remove:
Cylinder Head Cover Bolts [A] with Washers
Cylinder Head Cover
Cylinder Head Cover Installation
•
Replace the plug hole gaskets with new ones.
•
Install:
Dowel Pins [A]
Plug Hole Gaskets [B]
•
Using a high flash-point solvent, clean off any oil or dirt
that may be on the liquid gasket coating area. Dry them
with a clean cloth.
•
Apply liquid gasket [A] to the cylinder head as shown.
Sealant - Liquid Gasket, TB1216B: 92104-1064
NOTE
â—‹
Make the application finish within 20 minutes with the
liquid gasket (TB1216B) to the mating surface of the
cylinder head cover is applied.
Loading ...
Loading ...
Loading ...