Loading ...
Loading ...
Loading ...
BRAKES 12-17
Brake Pads
Front Brake Pad Removal
•
Loosen the pad pins [A].
•
Remove the front caliper with the hose installed (see Front
Caliper Removal).
•
Remove:
Pad Pins
Brake Pads
Front Brake Pad Installation
•
Check that the pad spring [A] is in place on the caliper.
•
Push the caliper pistons in by hand as far as they will go.
•
Install the brake pads [A] on the pad spring correctly.
Fit the pad into the groove of the caliper as shown.
•
Install the pad pins while pushing the brake pads lightly.
•
Tighten the pad pins temporarily.
•
Install the front caliper (see Caliper Installation).
•
Tighten:
Torque - Front Brake Pad Pins: 15 N·m (1.5 kgf·m, 11 ft·lb)
WARNING
After servicing, it takes several applications of the
brake lever before the brake pads contact the disc,
which could result in increased stopping distance
and cause an accident resulting in injury or death.
Do not attempt to ride the motorcycle until a firm
brake lever is obtained by pumping the lever until
the pads are against the disc.
Rear Brake Pad Removal
•
Remove the rear caliper with the hose installed (see Rear
Caliper Removal).
•
Remove:
Clip [A]
Pad Pin [B]
•
Remove the brake pad [C] of the jaw side from the holder
shaft [D], then remove the other pad [E].
Loading ...
Loading ...
Loading ...