Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-61
Lighting System
•
Remove:
Bolts [A]
Clamp [B]
•
Remove the tail/brake light (LED) [C] rearward.
Tail/Brake Light (LED) Installation
•
Installation is the reverse of removal.
•
Check that the pads [A] are in place on the tail/brake light
(LED) [B]
Fit the pad to the corner line [C].
[D] 15 ∼ 20 mm (0.59 ∼ 0.78 in.)
•
Insert the projection [A] into the slit [B].
•
Run the lead correctly (see Cable, Wire, and Hose Rout-
ing section in the Appendix chapter).
License Plate Light Bulb Replacement
•
Remove:
License Plate Light Cover Screws [A]
License Plate Light Cover [B] and Lens
•
Pull out the bulb [A] straight from the socket.
NOTICE
Do not turn the bulb. Pull the bulb out to prevent
damage to the bulb. Do not use bulb rated for
greater wattage then the specified valve.
•
Replace the bulb with a new one.
•
Insert the new bulb into the socket.
•
Install the license plate light cover.
•
Tighten the license plate light cover screws.
Loading ...
Loading ...
Loading ...