Loading ...
Loading ...
Loading ...
BRAKES 12-53
Anti-Lock Brake System (Equipped Models)
Output Fluid Pressure Sensor (Front Brake)
Wiring Inspection (Service Code 83)
•
Perform the Pre-Diagnosis Inspection 1 and 2 (see In-
quiries to Rider).
If the yellow ABS indicator (LED) [A] lights, the ABS hy-
draulic unit has trouble. Replace the ABS hydraulic unit.
If the yellow ABS indicator (LED) does not lgiht, ABS sys-
tem is normal (service code is not stored; temporary fail-
ure.).
Output Fluid Pressure Sensor (Front Brake) Offset
Abnormal (Service Code 84)
•
Perform the Pre-Diagnosis Inspection 1 and 2 (see In-
quiries to Rider).
If the yellow ABS indicator (LED) [A] lights, the ABS hy-
draulic unit has trouble. Replace the ABS hydraulic unit.
If the yellow ABS indicator (LED) does not lgiht, ABS sys-
tem is normal (service code is not stored; temporary fail-
ure.).
Fluid Pressure Sensor Supply Voltage Inspection
(Service Code 89)
•
Perform the Pre-Diagnosis Inspection 1 and 2 (see In-
quiries to Rider).
If the yellow ABS indicator (LED) [A] lights, the ABS hy-
draulic unit has trouble. Replace the ABS hydraulic unit.
If the yellow ABS indicator (LED) does not lgiht, ABS sys-
tem is normal (service code is not stored; temporary fail-
ure.).
ABS Hydraulic Unit Removal
NOTICE
The ABS hydraulic unit [A] has been adjusted
and set with precision at the factory. Therefore, it
should be handled carefully, never struck sharply,
as with a hammer, or allowed to fall on a hard
surface.
Be careful not to get water or mud on the ABS hy-
draulic unit.
•
Drain the brake fluid from the front and rear brake lines.
Drain the brake fluid through the bleed valve by pumping
the brake lever and pedal.
Loading ...
Loading ...
Loading ...