Loading ...
Loading ...
Loading ...
16-94 ELECTRICAL SYSTEM
Immobilizer System (Equipped Models)
Ignition Key Collation Error
•
The ignition key 2 is successfully registered in the ECU.
The red warning indicator (LED) and immobilizer warning
indicator [A] blink 3 times and stops for 1 second and then
repeat this cycle to indicate successful programming of
ignition key 2.
•
Turn to “OFF” the ignition switch and wait for period more
than 15 seconds.
•
The registration mode automatically ends.
•
The red warning indicator (LED) goes off [A].
•
Remove the key registration unit, key registration adapter
and install the immobilizer/Kawasaki diagnostic system
connector cap.
NOTE
○
Turn the ignition switch to “ON” with the registered igni-
tion key.
○
Check that the engine can be started using all regis-
tered ignition keys.
•
Install the new ignition switch (see Immobilizer System
Parts Replacement).
Case 3: When the ECU is faulty and has to be replaced.
•
Prepare a new ECU [A] and current registered ignition
key(s) [B].
NOTE
○
The key registration unit is not required.
○
After replacing the ECU, be sure to register the 2 ignition
keys. If the 2 keys are not registered, the engine can
not be started.
Loading ...
Loading ...
Loading ...