Loading ...
Loading ...
Loading ...
COOLING SYSTEM 4-21
Hose and Pipes
Hose Installation
•
Install the hoses and pipes, being careful to follow bend-
ing direction. Avoid sharp bending, kinking, flattening or
twisting.
•
Run the hoses (see Cable, Wire, and Hose Routing sec-
tion in the Appendix chapter).
•
Install the clamp [A] as near as possible to the hose end
to clear the raised rib of the fitting. This will prevent the
hoses from working loose.
The clamp screws should be positioned correctly to pre-
vent the clamps from contacting the other parts.
Torque - Water Hose Clamp Screws: 3.0 N·m (0.31 kgf·m,
27 in·lb)
Hose Inspection
•
Refer to the Water Hose and Pipe Inspection in the Peri-
odic Maintenance chapter.
Loading ...
Loading ...
Loading ...