Loading ...
Loading ...
Loading ...
12-22 BRAKES
Brake Disc
Brake Disc Removal
•
Remove the wheels (see Front/Rear Wheel Removal in
the Wheels/Tires chapter).
•
Remove the brake disc mounting bolts [A], and take off
the disc [B].
•
Remove the wheel rotation sensor rotor [C] (Front, ABS
equipped models).
Brake Disc Installation
•
Replace the gaskets with new ones.
•
Install the brake disc on the wheel so that the marked side
[A] faces out.
•
Install the wheel rotation sensor rotor on the brake disc
so that the marked side faces out.
•
Apply a non-permanent locking agent to the threads of
the front and rear brake disc mounting bolts.
•
Tighten the front and rear brake disc mounting bolts fol-
lowing the specified tightening sequence.
Front Brake Discs [B]
Rear Brake Disc [C]
Torque - Brake Disc Mounting Bolts: 27 N·m (2.8 kgf·m, 20
ft·lb)
Brake Disc Wear Inspection
•
Measure the thickness of each disc [A] at the point where
it has worn the most.
If the disc has worn past the service limit, replace it.
MeasuringArea[B]
Brake Discs Thickness
Standard:
Front
4.8
∼ 5.2 mm (0.19 ∼ 0.20 in.)
Rear
5.8
∼ 6.2 mm (0.23 ∼ 0.24 in.)
Service Limit:
Front
4.5 mm (0.18 in.)
Rear
5.5 mm (0.22 in.)
Loading ...
Loading ...
Loading ...