Loading ...
Loading ...
Loading ...
16-76 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
•
Push the upper [A] and lower [B] buttons more than 2
seconds, within 20 seconds after the terminal [6] discon-
nected.
•
Check that the red warning indicator (LED) [C] goes on 1
second, and then the indicator starts blinking (Immobilizer
Warning Indicator Blinking Mode).
If the meter function does not work, replace the meter unit.
Check 3-4: Blue High Beam Indicator (LED) Inspection
•
Connect the leads in the same circuit as Check 3-1.
•
Connect the terminal [15] to the battery (+) terminal.
•
Check that the blue high beam indicator (LED) [A] goes
on.
If the indicator (LED) does not go on, replace the meter
unit.
Check 3-5: Green Left Turn Signal Indicator (LED) In-
spection
•
Connect the leads in the same circuit as Check 3-1.
•
Connect the terminal [3] to the battery (+) terminal.
•
Check that the green left turn signal indicator (LED) [A]
goes on.
If the indicator (LED) does not go on, replace the meter
unit.
Loading ...
Loading ...
Loading ...