Loading ...
Loading ...
Loading ...
7-10 ENGINE LUBRICATION SYSTEM
Oil Screen
Oil Screen Removal
•
Remove:
Oil Pan (see Oil Pan Removal)
Oil Screen [A]
Oil Screen Installation
•
Clean the oil screen (see Oil Screen Cleaning).
•
Replace the O-ring [A] with a new one, and install it.
•
Apply grease to the O-ring.
•
Install the rubber damper [B] to the oil pressure relief
valve.
•
Install:
Oil Screen
Oil Pan (see Oil Pan Installation)
Oil Screen Cleaning
•
Remove the oil screen (see Oil Screen Removal).
•
Clean the oil screen with a high flash-point solvent and
remove the particles stuck.
•
Blow away the particles by applying compressed air [A]
from the inside to the outside (from the clean side to the
dirty side).
WARNING
Gasoline and low flash-point solvents can be
flammable and/or explosive and cause severe
burns. Clean the screen in a well-ventilated area,
and take care that there are no sparks or flame
anywhere near the working area; this includes any
appliance with a pilot light. Do not use gasoline or
a low flash-point solvent to clean the screen.
NOTE
â—‹
While cleaning the screen, check for any metal particles
that might indicate internal engine damage.
•
Check the screens carefully for any damage.
If the screen is damaged, replace the oil screen.
Loading ...
Loading ...
Loading ...