Loading ...
Loading ...
Loading ...
10-6 WHEELS/TIRES
Wheels (Rims)
Front Wheel Removal
•
For the ABS equipped models, remove the bolt [A] and
front wheel rotation sensor [B].
•
Remove:
Front Caliper Mounting Bolts [C] (Both Sides)
Front Caliper [D] (Both Sides)
•
Loosen:
Front Axle Clamp Bolts [A]
Front Axle [B]
•
Remove:
Lower Fairing (see Lower Fairing Removal in the Frame
chapter)
Oxygen Sensor [Equipped Models] (see Oxygen Sen-
sor Removal (Equipped Models) in the Electrical System
chapter)
•
Raise the front wheel off the ground.
Special Tools - Jack [A]: 57001-1238
Attachment Jack [B]: 57001-1252
Jack Attachment [C]: 57001-1608
•
Pull out the front axle to the right and drop the front wheel
out of the front forks.
NOTICE
Do not lay the wheel down on one of the discs. This
can damage or warp the disc. Place blocks un-
der the wheel so that the disc does not touch the
ground.
Front Wheel Installation
NOTE
â—‹
The direction of the wheel rotation [A] is shown by an
arrow [B] on the wheel spoke.
•
Check the wheel rotation mark on the front wheel and
install it.
Loading ...
Loading ...
Loading ...