Loading ...
Loading ...
Loading ...
BRAKES 12-23
Brake Disc
Brake Disc Warp Inspection
•
Raise the front/rear wheel off the ground.
Special Tools - Jack: 57001-1238
Attachment Jack: 57001-1252
Jack Attachment: 57001-1608
For front disc inspection, turn the handlebars fully to one
side.
•
Set up a dial gauge against the disc [A] as shown and
measure disc runout, while turning [B] the wheel by hand.
If runout exceeds the service limit, replace the disc.
Disc Runout
Standard:
Front
TIR 0.15 mm (0.006 in.) or less
Rear
TIR 0.15 mm (0.006 in.) or less
Service Limit:
Front
TIR 0.3 mm (0.01 in.)
Rear
TIR 0.3 mm (0.01 in.)
Loading ...
Loading ...
Loading ...