Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-85
Immobilizer System (Equipped Models)
•
Insert the registered ignition key to the ignition switch and
turn it to “ON.”
Verified
The red warning indicator (LED) and immobilizer warning
indicator [A] blink to display the registration mode (go to
the next step).
Not Verified
The red warning indicator (LED) and immobilizer warning
indicator [A] blink to display the collation error (refer to the
following failure illustrations).
Immobilizer Amplifier Failure
Registered Ignition Key Collation Error
•
Turn the registered ignition key to “OFF” and remove the
registered ignition key.
If there are other registered ignition keys, they should all
do the procedure above.
The red warning indicator (LED) and immobilizer warning
indicator [A] blink continuously to display that the ECU is
in the registration mode for 15 seconds.
NOTE
○
Insert next key and turn it to “ON” within 15 seconds af-
ter previous key is turned to “OFF” and removed other-
wise registration mode will be ended and the red warn-
ing indicator (LED) and immobilizer warning indicator
stops blinking.
○
To return to the registration mode start the registered
ignition key(s) verification procedure. This applies to all
ignition key registration.
•
Insert the ignition key 1 to the ignition switch and turn it to
“ON.”
NOTE
○
Keep the other ignition key away from the immobilizer
antenna.
Loading ...
Loading ...
Loading ...