Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 83
2. Ensure the power top is in the fully closed position.
3. Push and hold the Close switch for 10 seconds. This
will put the power top into calibration mode.
4. Continue holding down the close button while the top
goes fully open and then back to fully close.
5. Once the power top has stopped in the fully closed
position, release the close button. The power top is
now reset and ready to use.
NOTE:
If the close button is released anytime during the
relearning process, the relearn may not be complete, and
the procedure must be repeated.
REAR QUARTER WINDOW REMOVAL
On vehicles equipped with a Power Sliding Top, the rear
quarter windows can be removed. To remove these
windows, follow the procedure below:
1. Open the swing gate, and lift the rear window.
2. Open both side doors nearest the quarter windows.
3. Locate the rear quarter window latches (two on each
window) on the interior of the windows.
4. Rotate the left hand side latch
clockwise to release.
5. Rotate the right hand side latch
counterclockwise to
release.
Rear Quarter Window Release Latches
6. From the outside of the vehicle, lift each window
upward and away from the vehicle.
NOTE:
Do not pull down or apply any weight to the windows after
the latches are released. Damage could result to the pins
holding the windows in place.
Lift Quarter Window Upward And Outward
Quarter Window Pins Location
7. Store the rear quarter windows in the provided
storage bag and keep in a safe location, or securely
fasten the bag to the rear seat.
1 — Rotate Left Handle Clockwise
2 — Rotate Right Handle Counterclockwise
2
20_JL_OM_EN_USC_t.book Page 83
Loading ...
Loading ...
Loading ...