2020 JEEP WRANGLER User Manual

Loading ...

220 IN CASE OF EMERGENCY

BULB REPLACEMENT

NOTE:

Lens fogging can occur under certain atmospheric condi-

tions. This will usually clear as atmospheric conditions

change to allow the condensation to change back into a

vapor. Turning the lamps on will usually accelerate the

clearing process.

Halogen Headlamps

1. Open hood and support using prop rod.

2. Remove the front grille. Turn the retainers along the

top a quarter turn counterclockwise and remove.

3. Pull the bottom of the grille away starting at one side

and working toward the other.

4. Remove the three screws holding the headlamp to

the vehicle.

5. Remove lamp from the vehicle.

6. Remove the lamp from the collar.

7. Grasp the bulb and rotate a quarter turn counter-

clockwise.

8. Pull the bulb from the housing.

9. Push connector locking tab to the unlock position.

10. Remove connector from bulb.

11. Push connector onto new bulb base, and push the

connector locking tab to the lock position.

12. Reinstall bulb housing. Rotate the bulb a quarter turn

clockwise.

Front Park/Turn Signal

1. Remove the front wheel liner fasteners to access

bulb sockets.

Wheel Liner

2. Turn the socket assembly a quarter turn counter-

clockwise and remove from housing. Pull the bulb

straight from the socket to replace.

LED Front Side Marker

1. Remove the front wheel liner fasteners to access

side maker screw and electrical connector.

2. Remove fastening screw in the back of the front side

maker assembly and disconnect electrical connector.

3. Remove and replace LED front side marker light

assembly.

Halogen Front Fog Lamp

1. Reach under the vehicle to access the back of the

front fog lamp.

2. Disconnect the wire harness connector from the front

fog lamp connector receptacle.

3. Firmly grasp the bulb by the two latch features and

squeeze them together to unlock the bulb from the

back of the front fog lamp housing.

4. Pull the bulb straight out from the keyed opening in

the housing and then connect the replacement bulb.

LED Front Fog Lamp

If your vehicle is equipped with LED fog lamps they are

replaced as an assembly.

CAUTION!

Do not touch the new bulb with your fingers. Oil

contamination will severely shorten bulb life. If the bulb

comes in contact with any oily surface, clean the bulb

with rubbing alcohol.