Loading ...
Loading ...
Loading ...
248 SERVICING AND MAINTENANCE
Engine Air Cleaner Filter Inspection and
Replacement
Follow the recommended maintenance intervals as shown
in the Maintenance Schedule in this section.
Engine Air Cleaner Filter Removal
1. Loosen the retainers from the air cleaner cover
using a suitable tool.
Air Cleaner Filter Cover
2. Lift the air cleaner cover to access the air cleaner
filter.
Air Cleaner Filter Cover
3. Remove the air cleaner filter element from the
housing assembly.
Air Cleaner Filter
Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if dirt or debris is present
before replacing the air filter element.
1. Install the air cleaner filter element into the housing
assembly with the air cleaner filter inspection
surface facing downward.
2. Tighten air cleaner cover retainers using a suitable
tool.
ACCESSORY DRIVE BELT INSPECTION
1 — Retainers
2 — Air Filter Cover
1 — Air Cleaner Filter Inspection Surface
2 — Air Cleaner Filter
WARNING!
Do not attempt to inspect an accessory drive belt
with vehicle running.
When working near the radiator cooling fan, discon-
nect the fan motor lead. The fan is temperature
controlled and can start at any time regardless of
ignition mode. You could be injured by the moving
fan blades.
You can be badly injured working on or around a
motor vehicle. Only do service work for which you
have the knowledge and the proper equipment. If
you have any doubt about your ability to perform a
service job, take your vehicle to a competent
mechanic.
20_JL_OM_EN_USC_t.book Page 248
Loading ...
Loading ...
Loading ...