Loading ...
Loading ...
Loading ...
250 SERVICING AND MAINTENANCE
Air Conditioning Filter Replacement
(A/C Air Filter)
The A/C air filter is located in the fresh air inlet behind the
glove compartment. Perform the following procedure to
replace the filter:
1. Open the glove compartment and remove all
contents.
2. Push up on the glove compartment travel stop and
lower the door.
Glove Compartment Travel Stop
3. Pivot the glove compartment downward.
4. Disengage the two retaining tabs that secure the air
filter access door to the HVAC housing.
Air Filter Retaining Tabs
5. Remove the air filter from the HVAC air inlet housing.
Pull the filter elements out pinching them to the right
for clearance.
Air Filter
6. Install the A/C air filter with the air filter position
indicators pointing in the same direction as removal.
7. Close A/C Air Filter access door and secure retaining
tabs.
8. Rotate the glove compartment door back into
position ensuring you have properly engaged the
travel damper.
Travel Dampener
Refer to the “Maintenance Plan” in this section for the
proper maintenance intervals.
WARNING!
Do not remove the cabin air filter while the vehicle is
running, or while the ignition is in the ACC or ON/RUN
mode. With the cabin air filter removed and the blower
operating, the blower can contact hands and may
propel dirt and debris into your eyes, resulting in
personal injury.
CAUTION!
The cabin air filter is identified with an arrow to indicate
airflow direction through the filter. Failure to properly
install the filter will result in the need to replace it more
often.
1 — Travel Dampener Housing
2 — Travel Dampener Rod
20_JL_OM_EN_USC_t.book Page 250
Loading ...
Loading ...
Loading ...