Loading ...
Loading ...
Loading ...
56 GETTING TO KNOW YOUR VEHICLE
DOOR FRAME REMOVAL
NOTE:
In four door models, the rear door frames must be
removed first, followed by the front door frames.
1. Using the provided #40 Torx head driver and
ratchet, loosen the Torx screws located on the
underside of each door frame (two per door).
Door Frame Screw Locations
2. Once all the way loosened, remove the screws by
pulling downward.
NOTE:
Screws will not fall out once completely loose, as they are
held in place by an internal mechanism.
Remove Screws From Below Frame
3. Lift the frame upward, removing it from the vehicle.
Step Three
4. Store screws in a secure location.
5. Repeat procedure on the front door frame (four door
models).
CAUTION!
Failure to follow these cautions may cause interior
water damage, stains or mildew:
Opening a door or lowering a window while the top is
wet may allow water to drip into the vehicle's interior.
Careless handling and storage of the removable door
frame(s) may damage the seals, causing water to
leak into the vehicle's interior.
The door frame(s) must be positioned properly to
ensure sealing. Improper installation can cause
water to leak into the vehicle's interior.
WARNING!
Do not drive your vehicle on public roads with the
door frame(s) removed as you will lose the protection
that they can provide. This procedure is furnished for
use during off-road operation only.
Do not drive your vehicle on public roads with the
doors removed as you will lose the protection that
they can provide. This procedure is furnished for use
during off-road operation only.
20_JL_OM_EN_USC_t.book Page 56
Loading ...
Loading ...
Loading ...