Loading ...
Loading ...
Loading ...
182 STARTING AND OPERATING
TO MANUALLY TURN ON THE STOP/
S
TART SYSTEM
Push the Stop/Start OFF switch (located on the switch
bank). The light on the switch will turn off.
SYSTEM MALFUNCTION
If there is a malfunction in the Stop/Start system, the
system will not shut down the engine. A “SERVICE STOP/
START SYSTEM” message will appear in the instrument
cluster display. Refer to “Instrument Cluster Display“ in
“Getting to Know Your Instrument Panel” for further
information.
If the “SERVICE STOP/START SYSTEM” message appears
in the instrument cluster display, have the system
checked by an authorized dealer.
ACTIVE SPEED LIMITER — IF EQUIPPED
Active Speed Limiter Button
The Active Speed Limiter button is positioned on the right
side of the steering wheel.
This feature allows you to program the maximum speed of
travel for your vehicle.
NOTE:
The Active Speed Limiter can be set with the vehicle
stationary, or in motion.
ACTIVATION
To activate the feature, push the Active Speed Limiter
button, and a message will appear along with an indicator
light in the instrument cluster display to signal that Active
Speed Limiter has been activated.
Push the SET (+) and SET (–) buttons on the right of the
steering wheel to raise and lower the Active Speed Limiter
to the desired value. Pushing and holding down the SET
(+) or SET (–) buttons will increase/decrease the speed
value by increments of 5 mph (5 km/h).
Each time that Active Speed Limiter is activated, it will be
set to the last programmed value from the previous
activation.
NOTE:
The Speed Control (if equipped) and Adaptive Cruise
Control (if equipped) features will be unavailable while the
Active Speed Limiter is in use.
EXCEEDING THE SET SPEED
By fully pressing the accelerator pedal, the programmed
maximum speed can be exceeded while the device is
active.
In the event that the Active Speed Limiter set value is
exceeded manually with a driver acceleration, an audible
indicator will sound, the indicator light will rapidly flash,
and a message will appear in the instrument cluster
display.
The feature will remain disabled until the vehicle speed
drops below the set Active Speed Limiter value, where it
will reactivate automatically.
DEACTIVATION
To turn off Active Speed Limiter, push the Active Speed
Limiter button on the right side of the steering wheel. A
message will appear in the instrument cluster display to
confirm that the feature has been turned off.
20_JL_OM_EN_USC_t.book Page 182
Loading ...
Loading ...
Loading ...