User Manual - Page 50

For 2020 JEEP WRANGLER.

Loading ...
Loading ...
Loading ...
48 GETTING TO KNOW YOUR VEHICLE
AUTO-DOWN FEATURE
The driver door power window switch and the passenger
door power window switches have an Auto-Down feature.
Push the window switch down, for a short period of time,
and release and the window will go down automatically.
To partially open the window, push the window switch
down briefly and release it when you want the window to
stop.
To stop the window from going all the way down during the
Auto-Down operation, pull up on the switch briefly.
WIND BUFFETING
Wind buffeting can be described as the perception of
pressure on the ears or a helicopter-type sound in the
ears. Your vehicle may exhibit wind buffeting with the
windows down in certain open or partially open positions.
This is a normal occurrence and can be minimized by
adjusting the window opening.
DUAL TOP FOUR DOOR MODELS —
IF EQUIPPED
If your vehicle is equipped with a Dual Top, the soft top
system will be provided in a separate box located in the
rear of the vehicle for shipping purposes only.
The soft top
and the hard top are to be used independently. Your
vehicle warranty will not cover damage resulting from both
tops being installed at the same time.
For your convenience, a tool kit is provided with your
vehicle located in the center console. This kit includes the
necessary tools required for the operations described in
the following sections. All pieces fit into the ratchet for
easy use.
Provided Tools
REMOVING THE SOFT TOP FOUR
D
OOR MODELS
Use this QR code to access your digital
experience.
1. Fully lower the soft top. Refer to
“Soft TopFour Door Models” in
this section.
2. Make sure the lift assist mechanism on both the left
and right sides are in the “lock” position, and an
audible click is heard when pushing down on the #1
bow from each of the lift assist mechanisms before
removing.
Lock Position
WARNING!
There is no anti-pinch protection when the window is
almost closed. Be sure to clear all objects from the
window before closing.
1 — #50 Torx Head Driver
2 — #40 Torx Head Driver
3 — 15mm Socket
4 — Ratchet
CAUTION!
Failure to follow the next steps could result in damage
to the Soft Top or vehicle.
20_JL_OM_EN_USC_t.book Page 48
Loading ...
Loading ...
Loading ...