Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 23
1. Roll down the glass window to prevent any damage.
2. Remove the hinge pin screws from the upper and
lower outside hinges (using a #T50 Torx head driver).
NOTE:
The hinge pin screws and nuts can be stowed in the rear
cargo tray located under the rear load floor.
Hinge Pin Screw
3. Remove the plastic wiring access door under the
instrument panel by sliding the plastic panel along
the door frame toward the seats until the tabs are
detached.
Wiring Access Door
NOTE:
Do not pry back to open, as this will break the plastic
cover.
4. Pull up on the red locking tab to unlock the wiring
harness.
Closed Wiring Harness
5. Push and hold down the black security tab under the
wiring harness, and lift the harness into the open
position.
Open Wiring Harness
6. With the wiring harness open, pull downward on the
wiring connector to unplug. Store the wiring
connector in the lower door basket.
1 – Locking Tab
2 – Wiring Harness
1 – Wiring Harness
2 – Security Tab
2
20_JL_OM_EN_USC_t.book Page 23
Loading ...
Loading ...
Loading ...