User Manual - Page 169

For 2020 JEEP WRANGLER.

Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 167
Maximum Recommended Downshift Speeds
NOTE:
Vehicle speeds shown in the chart above are for 2H and 4H only, vehicle speeds in 4L would be significantly less.
CAUTION!
Skipping gears and downshifting into lower gears at higher vehicle speeds can damage the engine and clutch systems. Any attempt to shift into lower gear with the clutch pedal
depressed may result in damage to the clutch system. Shifting into lower gear and releasing the clutch may result in engine damage.
When descending a hill, be very careful to downshift one gear at a time to prevent overspeeding the engine which can cause engine damage, and/or clutch damage, even if the
clutch pedal is pressed. If transfer case is in low range the vehicle speeds to cause engine and clutch damage are significantly lower.
Failure to follow the maximum recommended downshifting speeds may cause the engine damage and/or damage the clutch, even if the clutch pedal is pressed.
Descending a hill in low range with the clutch pedal depressed could result in clutch damage.
CAUTION!
Failure to follow the maximum recommended downshifting speeds may cause the engine to overspeed and/or damage the clutch disc, even if the clutch pedal is pressed.
Manual Transmission Downshift Speeds in MPH (KM/H)
Gear Selection 6 to 5 5 to 4 4 to 3 3 to 2 2 to 1
Maximum Speed 80 (129) 70 (113) 50 (81) 30 (48) 15 (24)
5
20_JL_OM_EN_USC_t.book Page 167
Loading ...
Loading ...
Loading ...