Loading ...
Loading ...
Loading ...
Tap [Level] to turn the level meter on or off.
Tap [Level calibration] to calibrate the standard for the horizontal plane to fix deviations in the direction of tilt.
Tap [Remaining memory format] to switch the unit for displaying the remaining memory between the remaining
recordable time and the remaining memory capacity.
Tap [Audio settings] to reduce wind noise or change the audio level. The currently used mic is also displayed.
Tap [Assign shutter button] to use the shutter button as a REC button or a Grab button. When [Record] is
selected, you can start recording by pressing the shutter button even if a setting dialog is open.
Tap [Assign volume buttons] to use the volume button as a REC button, volume button, manual focus button, or
zoom button. When [Record] is selected, you can start recording by pressing the volume button even if a setting
dialog is open.
Tap [REC button position] to change the position of the REC button and the Grab button.
You can register and recall recording settings. Tap [Save current settings], select a slot, adjust the settings, and
then tap [Save] to register often-used combinations of modes and settings. To apply the saved settings, tap
[Memory recall settings], select the desired slot, and then tap [Apply].
Project settings
Tap an orange parameter to adjust the resolution and frame rate of the entire project or video clips. The project
settings can only be changed before recording the first video clip.
3.
Clip settings – Parameters to adjust for each video clip.
Tap [Look] to adjust the ambience of the video clip.
Tap [FPS] to adjust the frame rate. Select [120] to record a video in slow motion.
Tap [Lens] to select a lens. When [85-125mm F2.3-2.8] is selected, the zoom slider appears and you can use
optical zoom. Tap T or W to zoom directly to the maximum or minimum focal length.
Tap [ISO] to adjust the ISO value. Tap [Auto] when it is orange to adjust to the appropriate ISO value
automatically.
Tap [WB] to adjust the white balance. You can use the sliders to adjust the white balance. Tap [Reset] to reset the
slider values for the selected setting.
To adjust the white balance according to a selected white area, select [Custom 1]/[Custom 2]/[Custom 3], tap
[Set], hold your device so that the white area fully covers the frame in the center, and then tap [Set] again.
If you select [Auto], you can set whether to lock the white balance settings.
To switch the displayed options between the preset mode and temperature mode, tap (Menu icon) > [WB
mode].
Tap [Shutter] to adjust the shutter speed. Tap [Auto] when it is orange to adjust the appropriate shutter speed
automatically.
Tap [Focus] to adjust the focus. Tap [AF] or [MF] to switch the focus mode to auto or manual. When the focus
mode is set to manual, you can adjust the focus markers and speed of focus pulling by tapping
(Settings
icon). When the focus mode is set to auto, you can specify the focus area by tapping the viewfinder.
4.
Tap to start or stop recording.5.
Tap to capture the current frame as a still image.6.
Tap to hide or show the frame lines, grid lines, Metered Manual, and zoom slider that appears when [85-125mm
F2.3-2.8] is selected.
7.
Level meter
Level meter helps you to measure the angle of the device and keep the picture horizontal. When your device senses
that it is level, the level meter turns green.
8.
Status indications9.
Thumbnail
Tap a thumbnail to view a video clip or still image. Swipe left or right to view the previous or next video clip or still
image.
To return to the Cinema Pro home screen, swipe down on the screen or tap (Back button).
10.
118
Loading ...
Loading ...
Loading ...