Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 97
5. Lift the Freedom Top bag into the vehicle with
the hooks and straps facing the back of the
rear seat. Attach the clip at the bottom of the
bag to the child restraint anchorage, located at
the base of the rear seat.
6. Wrap the upper strap around the rear head
restraints and loop the strap through the
buckle. Pull on the strap to tighten the
Freedom Top bag securely against the rear
seat.
HARD TOP FRONT PANEL(S)
I
NSTALLATION
1. Open the header latch inside the vehicle, and
the three L-shaped locks on each panel.
2. Set the right side panel on the windshield
frame with the locating pin in the front receiver
mounting hole followed by the left side panel,
making sure there is no overhang. Also, make
sure that the panels are sitting flush with the
body.
3. Reinstall the panel(s) using the same steps for
removal in reverse order.
NOTE:
To prevent water leaks, the seals and hard top
panels should be clear of any dust and debris prior
to reinstallation.
REMOVING THE HARD TOP
1. Remove both front panels
Ú
page 93.
2. Open both front doors.
3. Using the provided #50 Torx head driver and
ratchet, remove the two Torx head screws that
secure the hard top at the B-pillar (near the top
of the front doors).
Step Three
4. Remove the six Torx head screws that secure
the hard top to the vehicle (along the interior
bodyside — three screws on each side) using
the #50 Torx head driver.
Step Four
5. Open the swing gate all the way to ensure
clearance of the rear window glass. Lift the
rear window glass.
Step Five
2
22_JL_OM_EN_USC_t.book Page 97
Loading ...
Loading ...
Loading ...