Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 415
Cargo Carpet (Four Door Models) With Gap Hider:
1. Remove the grommets under the rear seat
(one left and one right).
2. Pull the carpet out to the front and open the
carpet split around the seat belt attachment
and under the center seat bracket.
Under Rear Seat
3. When reinstalling carpet please perform these
steps in reverse order making sure that the
carpet is tucked under the scuffs, B-pillar,
console, and refasten grommets.
Side Carpet (Four Door Models):
1. Remove the side grommets (one left and one
right).
2. Pull the carpet out starting on the top flange,
then all around the perimeter and open the
carpet split around the seat belt attachment.
Inside Sidewall
3. When reinstalling carpet please perform these
steps in reverse order making sure that the
carpet is tucked under the scuffs, B-pillar,
console, and refasten grommets.
Side Carpet (Two Door Models):
1. Remove the side grommet and then the lower
one (left and right).
2. Pull the carpet out starting on the top flange,
then all around the perimeter and open the
carpet split around the seat belt attachment.
3. When reinstalling carpet please perform these
steps in reverse order making sure that the
carpet is tucked under the scuffs, B-pillar,
console, and refasten grommets.
SEATS AND FABRIC PARTS
Use Mopar® Total Clean to clean fabric upholstery
and carpeting.
Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical
solvents or abrasive cleaners. This will weaken the
fabric. Sun damage can also weaken the fabric.
If the belts need cleaning, use a mild soap solution
or lukewarm water. Do not remove the belts from
the vehicle to wash them. Dry with a soft cloth.
1 — Carpet Split
2 — Grommets
3 — Rear Carpet
1 — Top Flange
2 — Grommet
3 — Side Carpet
WARNING!
Do not use volatile solvents for cleaning
purposes. Many are potentially flammable, and
if used in closed areas they may cause
respiratory harm.
8
22_JL_OM_EN_USC_t.book Page 415
Loading ...
Loading ...
Loading ...