Loading ...
Loading ...
Loading ...
336 IN CASE OF EMERGENCY
Jack Warning Label
1. Remove the spare tire, jack and tools from
the stored location.
2. Loosen (but do not remove) the wheel lug nuts
by turning them to the left one turn while the
wheel is still on the ground.
3. Assemble the jack and jacking tools. Connect
the jack handle driver to the extension, then to
the lug wrench.
Assembled Jack And Tools
NOTE:
If your vehicle comes with factory equipped
35 inch (88.9 centimeters) tires, a jack lift block is
provided in the rear cargo area. The jack lift block
is used to provide higher ground clearance when
changing a flat or spare tire. When placing the jack
lift block under the jack, be sure the bottom of the
jack fits securely inside of the raised edges of the
block.
Jack Lift Box Usage
4. Operate the jack from the front or the rear of
the vehicle. Place the jack under the axle tube,
as shown. Do not raise the vehicle until you are
sure the jack is fully engaged.
Front Lifting Point
22_JL_OM_EN_USC_t.book Page 336
Loading ...
Loading ...
Loading ...