Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 101
6. Attach the rear clamp at the rear center of the
Sunrider® top using the two provided rear
clamp attachment bolts. Tighten with #40 Torx
head driver until snug.
Rear Clamp Location
NOTE:
The recommended torque specification for the rear
clamp attachment bolts is 3.7 ft-lb (5 N·m).
7. From inside the vehicle, lift and pull the
Sunrider® top forward using the integrated
handle on the front header of the top.
Manually guide the top into the closed
position.
Push Sunrider® Top Forward
8. From inside the vehicle, pull the handle on the
header latch downward to engage the hook
into its receiver. Pull the handle back upward
while squeezing the hook, locking the latch
into place. Repeat on the other side.
Engage Both Header Latches
To Open The Sunrider® Top
To open the Sunrider® top, proceed as follows:
1. Fold both sun visors forward against the
windshield.
2. Release the header latches from the crossbar
by pulling the handle downward. Make sure
the hook is disengaged from its receiver.
Release Both Header Latches
2
22_JL_OM_EN_USC_t.book Page 101
Loading ...
Loading ...
Loading ...