Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 91
4. Pull the release lever on top of the rail
rearward to release the side link from the
track.
Step Four
Step Four
5. Repeat on the opposite side.
6. Utilizing two people, lift the soft top up and
away from the vehicle, careful to avoid the
vehicle’s sport bar, trim, and tire carrier. Store
the soft top in a safe, clean, and dry location.
Step Six
7. Using the provided #50 Torx head driver and
ratchet, unscrew the Torx screw on both rear
corners of the vehicle, removing the retainers.
Step Seven
INSTALLING THE SOFT TOP
1. If currently installed, remove the hard top
Ú
page 97.
2. Install the door rails, starting with the front,
followed by the rear on each side. For
instructions and appropriate torque specifi-
cations for the door rail Torx screws
Ú page 107.
3. Install the rear retainers on each side of the
rear of the vehicle using the provided #50 Torx
head driver and ratchet. Refer to the following
table for recommended torque specifications.
Step Three
CAUTION!
Do not overtighten Torx screws. Damage to the
retainers will occur.
2
22_JL_OM_EN_USC_t.book Page 91
Loading ...
Loading ...
Loading ...