Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 93
(Continued)
6. While pulling the release lever on the top of the
rail rearward, place the side link into the guide
track on the top of the rail then release the
lever.
Step Six
7. Unsnap and remove the black boot cover. This
cover should be discarded. It was intended as
a protective cover for shipping only.
8. Raise the soft top Ú page 87.
NOTE:
Be sure the wire harness in the left rear corner is
not tangled in the soft top bows before you lift the
top.
HARD TOP FRONT PANEL(S) REMOVAL
Use this QR code to access your
digital experience.
CAUTION!
The hard top is not designed to carry any addi-
tional loads, such as after-market roof racks,
spare tires, building materials, hunting or
camping supplies, etc. For optional Mopar®
accessory roof racks Ú page 114.
Do not move your vehicle until the top has
been either fully attached to the front header,
sport bar, and body side or fully removed.
Failure to follow these cautions may cause
interior water damage, stains or mildew:
It is recommended that the top be free of
water prior to panel removal. Removing the
top, opening a door or lowering a window while
the top is wet may allow water to drip into the
vehicle’s interior.
The hard top assembly must be positioned
properly to ensure sealing. Improper installa-
tion can cause water to leak into the vehicle’s
interior.
Careless handling and storage of the remov-
able roof panels may damage the seals,
causing water to leak into the vehicle’s inte-
rior.
The front panel(s) must be positioned properly
to ensure sealing. Improper installation can
cause water to leak into the vehicle’s interior.
CAUTION!
2
22_JL_OM_EN_USC_t.book Page 93
Loading ...
Loading ...
Loading ...