Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 113
Hood Latch Locations
Remove the support rod from the hood, and insert
it into the radiator crossmember.
NOTE:
You may have to push down slightly on the hood
before pushing the safety latch.
CLOSING THE HOOD
If applicable, refer to the “Hybrid Supplement” for
additional information.
To close the hood, remove the support rod from the
slot and replace it on the hood panel retaining clip.
Lower the hood slowly. Secure both of the hood
latches.
REAR SWING GATE
The rear swing gate can be unlocked by using one
of the following methods:
Mechanical key (with mechanical lock — if
equipped)
Remote Keyless Entry key fob (if equipped)
Power door unlock switch on the front doors (if
equipped)
Passive Entry swing gate handle (if equipped)
To open the swing gate, pull on the handle.
Swing Gate Handle
NOTE:
Close the rear flip-up window before attempting to
close the swing gate (hard top models only).
WARNING!
Be sure the hood is fully latched before driving
your vehicle. If the hood is not fully latched, it
could open when the vehicle is in motion and
block your vision. Failure to follow this warning
could result in serious injury or death.
CAUTION!
To prevent possible damage, do not slam the
hood to close it.
WARNING!
Driving with the flip-up window open can allow
poisonous exhaust gases into your vehicle. You
and your passengers could be injured by these
fumes. Keep the flip-up window closed when you
are operating the vehicle.
CAUTION!
Do not push on rear wiper blade when closing
the rear flip-up window, as damage to the blade
will result.
2
22_JL_OM_EN_USC_t.book Page 113
Loading ...
Loading ...
Loading ...